Skip to content

Article · Part of the guide How to sell clothes online: a guide for fashion stores

How to make a size chart for your clothing brand

A good size chart for a clothing brand lists the real measurements of each garment in every size, measured flat with a tape, next to the body measurements each size is meant for. Make one chart per product or per cut, show centimetres and inches, explain how to measure, and add the model's height and size on the product page. Copying a generic chart from a supplier or another brand is the most common reason buyers pick the wrong size.

What to measure on each type of garment

Garment measurements to include in a size chart, by product type
GarmentMeasure flatAlso useful
T-shirts, tops, shirts, blousesChest width (armpit to armpit), total length from the highest shoulder pointShoulder width, sleeve length
Hoodies, jackets, coats, blazersChest width, length, sleeve length from the shoulder seamShoulder width, hem width, whether it fits over a jumper
DressesBust, waist and hip width, total lengthWhere the waist sits, slit length, stretch
SkirtsWaist width, hip width, lengthStretch of the waistband
Trousers, jeans, leggingsWaist width, hip width, inseam, riseLeg opening, thigh width
ShortsWaist width, hip width, inseamLeg opening
Sports bras and swimwearUnderband width, cup or bust measurement as you size itStretch and level of support in words

Measure flat on a table, with the garment buttoned or zipped, without stretching it. Widths measured flat are half of the circumference; say clearly whether your chart shows the flat width or the full circumference, because buyers mix them up.

Body measurements and garment measurements are different

There are two kinds of size chart, and many stores confuse them. A body measurement chart says which body a size is made for: for example, size M fits a chest of 92 to 96 cm. A garment measurement chart says how big the item itself is: this shirt in M measures 54 cm across the chest when laid flat.

The difference between the two is the ease, the extra room the design allows. A slim shirt and an oversized hoodie can both be size M for the same body, but their garment measurements are far apart. That is why a single chart for the whole store does not work for clothing with different cuts.

The best charts show both. The body chart helps a buyer who knows their measurements, and the garment chart helps a buyer who compares with something they already own and love. The second method is the one many shoppers trust most: they lay their favourite shirt flat, measure it and compare.

How to build the chart, step by step

  1. Get one sample in every size

    Measure real garments from production, not the factory's spec sheet. Small differences between spec and reality are exactly what causes returns.

  2. Measure each point the same way every time

    Use the same tape, the same points and the same person if you can. Write down the measuring method once and reuse it for every new product.

  3. Round sensibly

    Round to the nearest half centimetre and convert to inches with one decimal. Do not show more precision than your production really has.

  4. Group products by cut

    Products made on the same pattern can share one chart. A new cut needs its own chart, even in the same category.

  5. Add the body chart

    Say which body measurements each size is designed for, so buyers who measure themselves can pick quickly.

  6. Write fit notes in words

    Slim, regular, relaxed or oversized; whether the fabric stretches; and whether you recommend sizing up or down.

  7. Test with real people

    Ask a few people of different sizes to choose a size from the chart alone, then try it on. Fix every point where they hesitate.

This takes an afternoon for a small range and saves many returns later. Keep the measurements in a spreadsheet, so you can update the chart when production changes.

Choosing your size range and the steps between sizes

Before you measure anything, decide which sizes you make and how far apart they are. The step between two sizes, often called grading, is usually a few centimetres in chest, waist and hip, and smaller in length and sleeve. Your pattern maker or workshop sets it, and your chart should show the result exactly as produced.

Keep the steps even across the range, so a buyer who is between two sizes can judge which way to go. If some products run small or large compared with the rest of your range, say so in the fit notes rather than hoping buyers notice it in the numbers.

Think about who you are leaving out. A range that stops at size L or 40 excludes many buyers, and some of them will order anyway and return. If you extend the range later, measure the new sizes as carefully as the first ones and update every chart that covers them. A clear, honest range builds more trust than a long range with guessed numbers.

How to present the size chart on the product page

Put a size chart link right next to the size selector, not at the bottom of the page. Shoppers look for it at the moment they choose a size. Show the chart as a simple table: sizes as columns or rows, measurements in centimetres first for European buyers, with inches as a second line or a toggle.

Add a small drawing or a sentence that explains where each measurement is taken. Under the chart, add the fit notes and the model information: the model is 175 cm tall and wears size S, for example. If you show products on AI models, say what size the garment in the photo is and describe the fit in words, so the buyer is not guessing from the image alone.

If you sell in several countries, translate the chart and the fit notes, and show local size labels if your buyers use them. Keep the numbers identical across languages; only the words change.

Size labels and European standards

Size labels such as S, M and L or 38 and 40 mean different things from brand to brand and country to country. Europe has a standard for this: EN 13402-3:2017 describes size labelling based on body measurements and intervals, with a pictogram that shows the key body measurements for the size. According to the BSI listing of the standard, it covers body dimensions, not garment dimensions.

You do not have to use the pictogram to sell online, but the idea behind it is useful: label sizes by the body they fit, in centimetres. If your brand sells across the region, a chart in centimetres helps buyers in every country more than a letter size alone. Check whether any labelling rules apply to your products in your market with an official source or an adviser; this article is not legal advice.

Mistakes that cause wrong sizes

  • One chart for everything. A store wide chart ignores different cuts and fabrics.
  • Supplier charts copied without checking. Factory charts are often body charts in another country's sizing, or spec sheets that differ from the real garment.
  • Flat width presented as circumference. A 50 cm flat chest is a 100 cm circumference; mixing them up sends buyers two sizes off.
  • Missing length. Length is the measurement that decides whether a dress or a pair of trousers works, yet many charts leave it out.
  • No fit notes. Numbers alone do not say whether a garment is meant to be loose.
  • Charts hidden in a footer link. If buyers cannot find the chart while choosing a size, it does not help.

Read the questions customers send you about sizes and the reasons they give for returns. They point to the exact lines your chart is missing.

Size charts and virtual try-on work together

A size chart answers how big a garment is. It does not answer how it will look on the buyer. That is the question a virtual try-on helps with. With Wizia Virtual Try-On, shoppers upload a photo of themselves on your product page and see the garment on their own body before they buy. Their photo is used only for the try-on and not kept. It installs with one script tag pasted into the store theme, and each try-on costs 1 credit.

Use both: the chart for the size, the try-on for the look, and clear on-model photos from AI Studio for the details. Our post on size and fit tools compares the other tools stores use, and how to reduce returns covers the rest of the product page.

Questions and answers
Should my size chart show body or garment measurements?

Both, if you can. Body measurements help buyers who know their size; garment measurements help buyers who compare with clothes they own. Say clearly which is which.

Can I copy another brand's size chart?

It is a poor idea for fit. Their garments are cut differently, so their numbers will not match your products. Measure your own samples instead.

Do I need a size chart for every product?

You need one for every cut. Products made on the same pattern can share a chart; a new pattern or a very different fabric needs its own.

Should I show centimetres or inches?

For European buyers, centimetres first. Add inches as a second line or a switch if you also sell to the UK or the US.

Your next collection could be online this week.

20 credits on us · no card