Skip to content

Article · Part of the guide AI product video ads for fashion stores

360 product photography: with a turntable, a DIY setup, or AI

For 360 product photography with a turntable, you place the product on the turntable, lock a camera on a tripod, and take a photo at every even step of the rotation, often 36 frames at 10 degrees each, then join the frames in a 360 viewer. Without a motorised turntable you can do the same at home with a manual turntable and angle marks, or skip the shoot and generate a rotating 360 degree view with AI. With Wizia a 360 view has 18 frames, costs 18 credits and is available on Pro and higher plans.

Three ways to make a 360 view

Methods for 360 product photography and what each one needs
MethodEquipmentEffort per product
Motorised turntableTurntable that turns in set steps, camera on a tripod, lights, softwareLow once set up; the turntable and software do the stepping
Manual turntable at homeA turning base with angle marks, phone or camera on a tripod, window lightHigher; you turn and shoot every frame by hand
AI in WiziaYour product photos, no turntableLow; 18 credits per 360 view, Pro and higher

All three end in the same kind of result: a sequence of still frames that, shown in order, make the product turn. The difference is who does the stepping and shooting. Our page on the 360 product spin explains what a 360 view is and how the AI route works in Wizia; this article focuses on the photography.

How 360 photography with a turntable works

The classic method is simple in principle. The product sits in the middle of a turntable. A camera on a tripod stays in one place, at one height, pointed at the product. The turntable turns by a fixed angle, the camera takes a photo, and this repeats until the product has turned a full circle.

The frames are then joined in a 360 viewer: a small piece of JavaScript on a web page that shows one frame after another as the shopper drags, so the product seems to rotate. Many viewers can also export the sequence as a GIF or a video for places that cannot run a viewer.

Motorised turntables built for product photography can trigger the camera and step the rotation by themselves, which makes one spin a matter of minutes once the lights are set.

How many frames you need

A 360 spin is often made of 36 frames, one every 10 degrees, according to the Wikipedia article on 360 product photography, and 72 or more frames are becoming common for a smoother turn. WebRotate 360, which makes 360 viewer software, recommends staying between 20 and 80 images per spin and keeping the combined file size under 20 MB, and says 72 or more images make sense for high end presentations of a few items.

More frames mean a smoother rotation, but also more shooting, more editing and a heavier page. For most fashion products, a spin in the range of 24 to 36 frames is a reasonable start. Try one product, look at it on a phone, and only add frames if the rotation feels jumpy.

The equipment list

  • A turntable. Motorised if you will shoot many products, manual if you are testing. It must carry the product without wobbling.
  • A tripod. The camera must not move between frames, or the spin will shake.
  • A camera or a recent phone. Use manual or locked settings, so focus, exposure and white balance stay the same in every frame.
  • Even light. Two soft lights on either side, or a large window with no direct sun. Light that changes during the spin makes frames flicker.
  • A plain background, white or light grey, wide enough to cover the product at every angle.
  • A remote or timer, so pressing the shutter does not move the camera.
  • Software to batch edit the frames the same way and to build the 360 viewer.

For clothing, add a mannequin or a dress form. Garments need a body shape to turn; a flat lay has no back to show.

A DIY setup without a motorised turntable

  1. Make an angle disc

    Print or draw a circle with marks at equal steps, for example 24 marks at 15 degrees or 36 marks at 10 degrees, and fix it under a manual turntable or a lazy Susan.

  2. Centre the product

    Place the product or the mannequin exactly in the middle, or it will drift across the frame as it turns.

  3. Lock the camera

    Put the phone or camera on a tripod at product height. Lock focus, exposure and white balance.

  4. Shoot one frame per mark

    Turn to the next mark, wait until the product stops moving, and shoot. Use a remote or the timer.

  5. Edit all frames together

    Apply the same crop, brightness and white balance to every frame in one batch.

  6. Build the spin

    Load the frames into a 360 viewer, or export a GIF or short video for places that need one.

Expect the first spin to take a while. Mark the tripod and turntable positions with tape, so the next product starts from the same setup.

360 photography for clothing

Clothing is harder than hard goods, because fabric moves and needs a body. A few tips:

  • Use a mannequin that fits the garment. A loose mannequin makes the garment hang wrong from some angles.
  • Pin and steam before you start. Every crease shows in every frame.
  • Turn slowly. A skirt or a dress keeps swinging after the turn; wait until it stops.
  • Decide on the mannequin look. Some stores remove the mannequin in editing for a ghost mannequin style, which is extra work on every frame.

Bags, shoes and accessories are easier: they stand on the turntable by themselves. Shoes are a natural fit for 360, because the heel and the sole profile are hard to judge from a front photo.

The AI route: a 360 view without a turntable

If you do not want to buy a turntable or spend time on every frame, AI can make the rotation for you. In Wizia you start from a product you have created in AI Studio from your product photos and generate a rotating 360 degree view of 18 frames from every angle. A 360 view costs 18 credits and is available on the Pro, Pro+, Business and Enterprise plans.

The AI builds the view from what it knows about the product, so the input photos matter. Give it clear photos in even light, with the whole product in the frame, and add a back and a side view when those sides have details. Then compare each angle with the real product before you use it, as with any AI image.

The AI route suits stores that want full rotations for many products without a studio. The turntable route suits stores that already have a studio, or products with details so fine that only a photograph of the real item will do.

360 view or video?

A 360 view and a product video do different jobs. A 360 view lets the shopper inspect the product from every side at their own pace. A video shows motion: fabric moving, a garment worn, a short story for social media.

For a product page, a 360 view answers questions about shape and detail. For Reels, TikTok and ads, a short vertical video works better. With Wizia AI Videos a product video is about 8 seconds, vertical 9:16, 1080p, and costs 35 credits. Many stores use both: the 360 view for key products, video for promotion. See the AI video ads guide for the video side.

Which route to choose

  • You shoot many hard goods every week: a motorised turntable pays off over time.
  • You want to test 360 on a few products: a manual turntable and a phone are enough.
  • You sell clothing and have no studio: the AI route avoids mannequins, steaming and frame editing.
  • You need a 360 view for a few hero products only: a studio service may be simpler than buying equipment.

Whichever route you pick, start with one product, look at the result on a phone, and then decide. Pro costs €98 a month and includes 750 credits; the pricing page lists every plan.

Questions and answers
Do I need a turntable for 360 product photography?

For the photographic method you need something that turns the product in even steps, motorised or manual. With AI, such as the Wizia 360 view, you need only your product photos.

How many photos does a 360 spin need?

Often 36 frames at 10 degrees each. WebRotate 360 recommends 20 to 80 images per spin; more frames turn more smoothly but take longer to shoot and load.

Can I do 360 product photography with a phone?

Yes, if the phone sits on a tripod and you lock focus, exposure and white balance so every frame matches.

How do I photograph clothes in 360?

Dress a mannequin that fits the garment, steam it, place it in the centre of the turntable and wait for the fabric to stop moving before each frame.

How much does an AI 360 view cost with Wizia?

Each 360 view costs 18 credits and is available on Pro and higher plans.

Your next collection could be online this week.

20 credits on us · no card